How To Do The Maintenance Of An Indoor Unit of Ducted AC

It’s been a while since you last did the maintenance of your ducted air conditioning system. You might have forgotten that it is very important to keep an eye on your unit at all times because it requires regular maintenance, including cleaning and replacing filters. But there are some things that you can do easily to maintain your indoor air conditioning unit. Here are some important tips for doing this task:

Collect Required Tools

The first thing you need to do is make sure that you have the required tools and equipment. If you don’t have any, then it’s time to go shopping. You can get everything you need at any hardware store or home improvement center. These stores also carry all kinds of other things such as paint, light bulbs, and electrical parts. If you do not have required tools, then you should call professionals like ducted air conditioning Sydney contractors. It is so because professionals have all kinds of required tools and equipment. 

 Unplug Your Air Conditioner

Unplugging the power cord from the wall socket will prevent any electrical shock which could lead to damage or injury if done improperly. In addition, it gives you more time to think about what you are doing before performing any actions because there won’t be any electricity running through them at this point.

See also  Where to Hang Sea Portraits and Painting

Remove Cover Openings

There are different types of covers with different designs depending on their purpose but all of them serve one purpose – protecting its internal components from dust particles and moisture as well as keeping it clean so

The maintenance of your indoor unit with a ducted air conditioner is very important to keep it functioning optimally. Without regular maintenance, your device may develop problems that will lead to reduced performance and increased energy consumption. The following tips will help you get the most out of your system:

Cleaning & Filter Replacement

Cleaning and replacing the filter on your system is one of the most important things you can do to ensure that it runs efficiently. If you don’t clean it regularly, particles can build up inside the unit which will eventually cause it to fail. You should replace your filter every six months or as soon as it starts showing signs of wear and tear (i.e., not working as efficiently).

Cleaning The Condenser

After that, you should clean the condenser (or compressor) at least once every three months. A good way to clean them is by using a power washer with water and mild soap solution, but make sure that you use gloves when handling any parts from the inside of your unit.

Checking Your Air Filter

Once you have cleaned your condenser, check if the air filter still has enough air flow through it by removing it from its position and looking at how much space is left between where it sits and where it meets up with other components such as fans or vents within the unit itself – if there is little to no space then replace

See also  Learn why wall to wall carpet is on the Rise. You have to know the facts.

Check For Leakage Signs 

Check for any signs of leaks or damage and make sure all connections are tight. If you have any questions about the maintenance, please call professionals like air conditioning Sydney contractors to fix them immediately. Otherwise, these small problems can lead to big trouble later on. Sometimes, leakage may be due to blockage. 

Therefore, it is recommended to open the front panel and check for any debris that may have been collected inside the unit. Look for anything that could be blocking the fan blades or causing a blockage in the airflow. If you find something, remove it immediately.

Get Rid Of Dust

With your vacuum cleaner, vacuum out all of the dust from inside the unit. You can use a small brush attachment on your vacuum to get into more inaccessible areas where dust tends to build up over time. You should remove any debris that might still be left inside by gently pushing it out through one of the gaps between panels or through one of the vents where any dust or dirt has settled over time during use periods. 

Once you’ve finished vacuuming out all of the dust, turn off your indoor unit and unplug it from its electrical outlet. Also, you should remove any rust or corrosion on the motor housing and clean thoroughly with a solvent such as acetone, lacquer thinner, or special purpose solvents such as Freon-type contact cleaners that can be purchased at most auto parts stores or home centers.

Preventing Corrosion & Condensation

Corrosion can be a serious problem if left unchecked, so make sure all metals used in your system are protected from corrosion by using anti-corrosion agents when necessary or installing an anti-corrosion coating on metal surfaces where required by law (such as in certain countries). Condensation is another problem caused by poor ventilation systems where the air has been trapped within a room for too long without being released into the outside air

See also  Choosing The Best Fixtures For Your Kitchen
By Emily Traylor

Leave a Reply

Your email address will not be published.