Mechanics are an essential part of any kind of vehicle maintenance and repairs, and one of the most important tools they need to do their job is a wrench. Bending wrenches correctly is an important skill for any mechanic to have, and there are several techniques that can be used to get the best results. Knowing how to use the right technique for different types of wrenches is key to getting the job done quickly and accurately. From using the right angle for a particular job to using a variety of tools to help you achieve the desired angle, these are some of the best bending wrenches for every budget for mechanics.
Basic Technique for Bending Wrenches
The most basic way of bending wrenches is by hand. This is best for small jobs, or for tightening loose nuts and bolts that don’t require an exact angle. To do this, first, place the wrench on the nut or bolt head, and hold it in place with your hand. Then place your other hand on the wrench, and turn the wrench clockwise as you apply pressure with your first hand. You may also want to stand on a step stool or a low stool to increase your leverage and make the job easier.
Using the Right Angle for a Particular Job
When you’re bending wrenches to tighten bolts and nuts to a specific angle, the best technique is by using a wrench joint. This is a small device that is clamped over the wrench, creating a 90-degree angle between the wrench and the head of the bolt. This is how mechanics perform a lot of their adjustments correctly, as it is useful for a variety of tasks.
First, you can use a wrench joint to loosen a bolt by holding the wrench joint in place and twisting the wrench handle back and forth. Then you can use the joint to tighten the bolt to the exact angle required. You can also use a wrench joint to bend a bolt into place with another wrench when there isn’t enough room for the wrench heads to be aligned properly.
Leverage Techniques for Bending Wrenches
Another method for bending wrenches is to use a wrench extension. This is a long, tubular piece of metal that slides over the end of a wrench, creating an extended arm that can be used to tighten or loosen bolts in hard-to-reach places. Wrench extensions are usually between 12 and 36 inches long, and can be folded and stored away when they’re not being used.
When using a wrench extension, you should try to get the angle right so that the fastener is tightened or loosened evenly. Otherwise, it might end up being bent at an angle, which could cause problems later on. Wrench extensions can be used with any type of wrench, but they’re most common with open-end wrenches and box wrenches.
Advantages and Disadvantages of Bending Wrenches
Bending wrenches are a fast, easy way to get a bolt into the right angle. However, they can’t be used for all types of bolts, and it’s important to be aware of their limitations. Bending wrenches can be used to tighten or loosen bolts that are the same size as your wrench, but not larger. Bending wrenches can also cause damage to certain materials like plastic and rubber, so it’s important to be careful when using them.
Another disadvantage of bending wrenches is that they don’t provide a lot of accuracies, so it’s difficult to get a bolt into the exact angle that’s required. And bending wrenches can be dangerous if they’re not done correctly, as they can cause damage to the bolt and the surrounding material if the angle is too great.
